Eric Karpman, Jozsef Kövecses, Marek Teichmann
Journal of Terramechanics, Volume 115, 2024, 100975, ISSN 0022-4898
https://doi.org/10.1016/j.jterra.2024.100975.(https://www.sciencedirect.com/science/article/pii/S002248982400017X)
Abstract: Dynamic simulations of various types of off-road vehicles, from planetary rovers to agricultural equipment, have long relied on well-established semi-empirical terramechanics models. While these models do have drawbacks and reliability issues that have been addressed by numerous works in the decades since the models were first introduced, semi-empirical approaches remain one of the few ways to simulate realistic wheel-soil interaction in real-time. One of their drawbacks is their assumption that the terrain is a flat plane. The models work by integrating normal and shear stresses along the wheel-terrain contact patch. The normal stress at each point along the contact patch is determined using an equation that computes soil pressure based on semi-empirical parameters, the dimensions of the wheel and the sinkage, which is determined based on the distance between the point and the plane that defines the terrain. Other works simplify the rough terrain contact problem by defining an equivalent contact plane at each time step in order to continue to be able to use semi-empirical models - modified to work with slanted planes - to compute the interaction forces. In this work, we propose a new, modified version of the semi-empirical model in which interaction forces for a wheel travelling on rough terrain can be computed without the need to use an equivalent contact plane. To highlight the advantages of our proposed approach, we compare our simulation results to the results of simulations using an existing approach for modelling a wheel travelling over rough terrain using traditional semi-empirical models.
Keywords: Terramechanics; Rough terrain; Wheel-soil; Semi-empirical